Product Function & Specs:

The LS12B01046P1 is identified as a Kobelco bushing bearing sleeve used at pivot and joint locations. It provides a bearing surface between mating components and supports controlled movement within the associated excavator structure. Public parts references associate this part with Kobelco SK480LC-6, SK480LC, and SK485-8 applications.

Failure Symptoms:

• Excessive play at the associated pivot or joint
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the joint area

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the applicable joint assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01046P1?

A: LS12B01046P1 is identified as a Kobelco bushing bearing sleeve used in pivot and joint applications.

Q: Which Kobelco machines use LS12B01046P1?

A: Public parts references associate the part with Kobelco SK480LC-6, SK480LC, and SK485-8. Confirm the machine serial number and assembly configuration before ordering.

Q: What should be checked before installing this bushing?

A: Inspect the mating pin, bushing bore, housing, and adjacent components for wear or damage before installation.

Q: Is LS12B01046P1 an engine part?

A: No engine application has been verified for this part. It is identified as a structural or joint bushing used on Kobelco excavator applications.

Q: Is LS12B01046P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for part number LS12B01046P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm, pivot, and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The 2405T1334 is identified as a Kobelco bushing used in the long-arm assembly. It provides a bearing surface between mating components and supports controlled movement at the arm connection. The referenced Kobelco parts catalogue lists two bushings in the 4.9 m long-arm assembly and specifies 120 mm inside diameter, 145 mm outside diameter, and 130 mm length.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the mating pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco 2405T1334?

A: 2405T1334 is a Kobelco bushing used in the long-arm assembly of large excavator applications.

Q: Which Kobelco machines use 2405T1334?

A: The available Kobelco parts reference associates it with SK480LC-6E, SK480-6S, SK480LC-6, and SK450-6 applications. Confirm the machine serial number and arm configuration before ordering.

Q: What are the published dimensions?

A: The referenced parts catalogue lists 120 mm inside diameter, 145 mm outside diameter, and 130 mm length.

Q: How many 2405T1334 bushings are used in the referenced long-arm assembly?

A: The Kobelco parts reference specifies two 2405T1334 bushings in the 4.9 m long-arm assembly.

Q: Is 2405T1334 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number 2405T1334. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The LS12B01013P1 is identified as a Kobelco bushing used in arm assembly applications. It provides a bearing surface between mating components and supports controlled movement at the arm connection. Kobelco parts references list this part in standard, short, semi-long, and long arm assemblies for the SK480LC.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01013P1?

A: LS12B01013P1 is a Kobelco bushing used in arm assembly applications on the SK480LC.

Q: Which Kobelco machine uses LS12B01013P1?

A: Public parts references associate the part with the Kobelco SK480LC Dynamic Acera excavator. Confirm the machine serial number and arm configuration before ordering.

Q: Which arm configurations use this bushing?

A: The available parts reference lists LS12B01013P1 in standard 3.45 m, short 2.6 m, semi-long 4.04 m, and long 4.9 m arm assemblies for the SK480LC.

Q: What should be checked before installing the bushing?

A: Inspect the mating pin, bushing bore, and adjacent arm components for wear or damage before installation.

Q: Is LS12B01013P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number LS12B01013P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The LS12B01013P1 is identified as a Kobelco bushing used in arm assembly applications. It provides a bearing surface between mating components and supports controlled movement at the arm connection. Public Kobelco parts references place this part in multiple SK480LC arm configurations.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear around the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01013P1?

A: LS12B01013P1 is a Kobelco bushing used in arm assembly applications on the SK480LC.

Q: Which Kobelco machine uses LS12B01013P1?

A: Public parts references associate the part with the Kobelco SK480LC Dynamic Acera excavator. Confirm the machine serial number and arm configuration before ordering.

Q: Which arm configurations use this bushing?

A: The available parts reference lists LS12B01013P1 in standard arm, short arm, semi-long arm, and long arm assemblies for SK480LC.

Q: What should be checked before installing the bushing?

A: Inspect the mating pin, bushing bore, and adjacent arm components for wear or damage before installation.

Q: Is LS12B01013P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number LS12B01013P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The 2445R372D5 is identified as a dust cap seal used in the Kobelco arm assembly. It helps protect the pin and joint area from external dirt and contamination. The referenced parts catalogue places four units in the long-arm assembly.

Failure Symptoms:

• Visible damage or deterioration of the dust cap seal
• Dirt or debris entering the protected pin-joint area
• Excessive contamination around the arm joint

Quick Installation Notes:

• Clean the seal seat, pin area, and surrounding components before installation.
• Inspect the pin, bushing, and adjacent joint surfaces for wear or damage.
• Install the dust cap seal evenly and check that the joint moves freely after assembly.

Maintenance Tips:

• Inspect arm-joint dust seals during scheduled machine maintenance.
• Keep dirt and abrasive contamination away from exposed pin and bushing areas.
• Inspect related pins and bushings when seal damage or excessive joint contamination is found.

FAQ:

Q: Can this part replace OEM 2445R372D5?

A: It is offered as a new aftermarket replacement for 2445R372D5. Confirm the arm configuration and machine serial number before ordering.

Q: Is this an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement. Product configuration and application should be confirmed before installation.

Q: Which Kobelco machines use 2445R372D5?

A: The referenced long-arm assembly catalogue lists it for Kobelco SK480LC-6E, SK480-6S, SK480LC-6, and SK450-6 applications.

Q: What should be checked before installing this seal?

A: Inspect the pin, bushing, seal seat, and adjacent joint surfaces. Keep the sealing area clean and follow the applicable service procedure.

Q: Can I purchase 2445R372D5 in bulk?

A: Yes. We support wholesale orders for parts dealers and workshops. Confirm the required quantity and application when requesting a quotation.

Why Sourcing From WinsParts?

We support part-number checking before quotation and can review machine model and serial-number details to reduce ordering errors.

Product Function & Specs:

The 2445R138D9 is a Kobelco dust seal used in hydraulic cylinder and related pin-joint applications. It helps limit the entry of dirt and other contaminants into the protected sealing area. Public Kobelco parts references specify a 100 mm inside diameter, 120 mm outside diameter, and 4 mm thickness.

Failure Symptoms:

• Visible damage or deterioration of the dust seal
• Dirt or debris entering the protected cylinder or joint area
• Excessive contamination around the seal location

Quick Installation Notes:

• Clean the seal groove, mating surface, and surrounding components before installation.
• Inspect the rod, pin, and sealing surfaces for damage or abnormal wear.
• Install the seal evenly without damaging or distorting the sealing lip.

Maintenance Tips:

• Inspect hydraulic cylinder and pin-joint seals during routine machine maintenance.
• Keep the sealing area free from excessive dirt and abrasive contamination.
• Check adjacent pins, bushings, and sealing surfaces for wear when replacing the dust seal.

FAQ:

Q: What is Kobelco 2445R138D9?

A: 2445R138D9 is a Kobelco dust seal used in hydraulic cylinder and related sealing applications.

Q: What are the dimensions of 2445R138D9?

A: Public Kobelco parts references specify 100 mm inside diameter, 120 mm outside diameter, and 4 mm thickness.

Q: Which Kobelco machines use this dust seal?

A: Public parts references associate 2445R138D9 with applications including SK480-6, SK400, and SK200. Confirm the cylinder position and machine serial number before ordering.

Q: Where is 2445R138D9 installed?

A: Parts diagrams show the seal in hydraulic cylinder and linkage-related assemblies. The exact installation position depends on the cylinder or assembly configuration.

Q: Is 2445R138D9 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number 2445R138D9. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm hydraulic sealing components against the required Kobelco machine configuration.

Product Function & Specs:

The 2405T1950 is identified as a bushing used in Kobelco arm assembly applications. It provides a bearing surface between mating components and supports controlled movement within the arm assembly. Public parts references associate the part with standard, heavy-duty, short, semi-long, and long arm configurations.

Failure Symptoms:

• Rough movement or binding at the arm joint
• Uneven wear at the bushing contact surface
• Excessive play or movement at the arm connection

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Check the pin and housing condition before fitting the replacement bushing.
• Rotate the assembly by hand and verify movement after installation.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Prevent water, dirt, and other contamination from entering the bushing area.
• Inspect the bushing, pin, and adjacent components periodically for wear or excessive play.

FAQ:

Q: Can this part replace OEM 2405T1950?

A: It is offered as a new aftermarket replacement for 2405T1950. Confirm the arm configuration and machine serial number before ordering.

Q: Is this an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement. Product configuration and application should be confirmed before installation.

Q: Which Kobelco machines use 2405T1950?

A: Public parts references associate it with Kobelco SK480-6, SK480LC, SK485LC-8, and SK485LC-9 arm assembly applications. Serial-number verification is recommended.

Q: What should be checked before installing this bushing?

A: Inspect the mating pin, bushing bore, and adjacent arm components for wear, contamination, or damage before installation.

Q: Can I purchase 2405T1950 in bulk?

A: Yes. We support wholesale orders for parts dealers and workshops. Contact us directly for bulk pricing and shipping options.

Why Sourcing From WinsParts?

Before quotation, we can compare the supplied part number with machine or engine information and flag details that require confirmation.

Product Function & Specs:

LS12B01025P1 is identified as a bushing used in Kobelco excavator linkage assemblies. Parts catalog evidence places the bushing within the arm group, where it supports movement between mating components. Application should be confirmed against the machine serial number and assembly location before installation.

Failure Symptoms:

• Excessive play or looseness at the linkage connection.
• Abnormal noise during boom, arm, or attachment movement.
• Visible wear or uneven contact around the bushing position.

Quick Installation Notes:

• Clean the bushing bore and mating surfaces, then inspect adjacent pins and components for wear.
• Install the bushing using the applicable service procedure and avoid damaging the contact surfaces.
• Check linkage movement and alignment after installation before returning the machine to normal operation.

Maintenance Tips:

• Inspect linkage bushings and pins periodically for excessive play or uneven wear.
• Maintain lubrication according to the applicable Kobelco service schedule.
• Clean accumulated dirt from working-equipment joints and investigate abnormal movement promptly.

FAQ:

Q: Can this part replace OEM LS12B01025P1?

A: Yes. It is offered as an aftermarket replacement for the referenced part number. Confirm the machine serial number and installation location before ordering.

Q: Is this an OEM or aftermarket replacement?

A: It is a new aftermarket replacement intended for heavy equipment service. Product configuration and application should be confirmed before installation.

Q: Which machines are compatible?

A: Available parts references identify LS12B01025P1 for Kobelco SK480LC-6, SK480LC, and SK485-8. Final fitment should be checked against the machine serial number.

Q: What should be checked before installing this bushing?

A: Inspect the mating pin, bore, lubrication path, and adjacent linkage components for wear, contamination, or dimensional damage.

Q: Can I purchase in bulk?

A: Yes. We support wholesale orders for parts dealers and repair workshops. Contact us directly for bulk pricing and shipping options.

Why Sourcing From WinsParts?

We support part-number checking before quotation and can review machine model and serial-number details to reduce ordering errors.