Product Function & Specs:

301-6948 is identified by Caterpillar as a 100 mm outside diameter taper sleeve. The component is a flanged sleeve bearing used in the suspension frame area of the drive axle.

• Type: Flanged sleeve
• Material: Steel, low alloy steel
• Outside Diameter: Approximately 100 mm / 3.937 in
• Inside Diameter: Approximately 3.216 in
• Overall Length: 3.228 in
• Flange Diameter: 4.488 in
• Lip Thickness: 0.47 in
• Internal Groove: No
• External Groove: No
• Cross Holes: No

Failure Symptoms:

• Excessive movement or play in the suspension frame connection
• Abnormal wear or damage around the sleeve bearing mounting area
• Unusual noise or vibration from the drive axle suspension assembly

Quick Installation Notes:

• Confirm the part number, bearing dimensions, and machine configuration before removal.
• Inspect the mating bore, shaft, retaining components, and surrounding parts for wear or damage.
• Use suitable tools and follow the applicable Caterpillar service procedure for installation and alignment.

Maintenance Tips:

• Inspect the sleeve bearing and surrounding suspension components during scheduled maintenance.
• Check for abnormal play, wear marks, cracks, or deformation.
• Follow the applicable lubrication and inspection requirements for the suspension assembly.

FAQ:

Q: What is Caterpillar 301-6948?

A: 301-6948 is a 100 mm outside diameter taper sleeve, identified as a flanged sleeve bearing for the suspension frame in the drive axle.

Q: Is this an OEM or aftermarket replacement?

A: This product is supplied as a new aftermarket replacement. It is not represented as a genuine Caterpillar factory part.

Q: Which Caterpillar machines use this part?

A: Caterpillar lists applications including 735B, 735C, 740, 740B, 740C, 740 GC, 745, and 745C articulated trucks, as well as 740 and 740B ejector trucks. Confirm the machine serial number before ordering.

Q: What dimensions should be checked before installation?

A: Confirm the outside diameter, inside diameter, overall length, flange diameter, and lip thickness against the original component and service documentation.

Q: Can I purchase this part in bulk?

A: Yes. WinsParts supports wholesale enquiries for parts distributors and repair workshops. Contact us for bulk quotation and shipping coordination.

Why Sourcing From WinsParts?

WinsParts supports part-number and equipment-configuration checks before quotation, helping parts dealers and repair workshops reduce ordering errors. Worldwide export and shipping coordination is available.

Product Function & Specs:

2625884 is identified as a Scania engine oil filter used in engine lubrication systems. The filter removes contaminants from circulating engine oil to support lubrication of internal engine components.

Published replacement references include MANN-FILTER HU 1077/2 X, HIFI-FILTER SO11103, and Hengst E123H01D194. Filter dimensions and sealing configuration should be checked against the original component before installation.

Failure Symptoms:

• Reduced oil flow caused by a restricted filter element
• Visible oil leakage around the filter sealing area
• Oil contamination or abnormal lubrication-system warning indications

Quick Installation Notes:

• Confirm the part number, filter type, and sealing surface before removing the existing filter.
• Clean the mounting area and replace damaged or unsuitable sealing components.
• Install according to the applicable Scania service instructions and check for oil leakage after starting.

Maintenance Tips:

• Replace the oil filter according to the engine maintenance schedule.
• Use the specified engine oil and maintain suitable oil cleanliness.
• Inspect the filter mounting area periodically for leakage or seal damage.

FAQ:

Q: Can this part replace OEM 2625884?

A: Yes. It is offered as a new aftermarket replacement for the referenced part number. Confirm the filter configuration before ordering.

Q: Is this an OEM or aftermarket replacement?

A: This product is supplied as a new aftermarket replacement. The manufacturer, filter media, and supplied sealing components should be confirmed before purchase.

Q: Which machines or engines are compatible?

A: Public catalogue information associates 2625884 with Scania P, G, R, and T series applications. Exact engine and vehicle compatibility should be checked using the vehicle identification number or engine details.

Q: What should be checked before installing the oil filter?

A: Check the filter dimensions, sealing surface, mounting arrangement, and replacement interval. Follow the applicable service instructions for filter installation and oil-system checks.

Q: Can I purchase in bulk?

A: Yes. We support wholesale orders for parts dealers and workshops. Contact us directly for bulk pricing and shipping options.

Why Sourcing From WinsParts?

We support part-number checking and vehicle or engine identification before quotation, helping dealers and repair workshops reduce ordering errors. Worldwide export and shipping coordination is available.

Product Function & Specs:

336/F4093 is identified by JCB as a fuel filter element. It is used in the fuel filtration system to help remove dirt, water, and other contaminants from fuel before delivery to the engine fuel system. JCB’s official product page does not publish detailed technical specifications for this part.

Failure Symptoms:

• Restricted fuel flow or reduced engine performance
• Water or contamination detected in the fuel system
• Difficulty starting or unstable engine operation

Quick Installation Notes:

• Clean the filter housing and surrounding fuel-system area before replacement.
• Confirm the filter configuration and sealing components before installation.
• Prime the fuel system according to the applicable service procedure and inspect for leaks.

Maintenance Tips:

• Replace the fuel filter according to the recommended maintenance interval.
• Use clean fuel and prevent contamination during filter servicing.
• Drain accumulated water when required by the applicable fuel-system procedure.

FAQ:

Q: What is part number 336/F4093?

A: JCB identifies 336/F4093 as a fuel filter element. Other parts references describe it as a fuel water separator.

Q: Does this part remove water from fuel?

A: JCB describes the fuel filter element as helping remove dirt, water, and contaminants from fuel.

Q: Which JCB machines use this filter?

A: Specific machine compatibility has not been independently verified. Confirm the machine serial number before ordering.

Q: Are the filter dimensions confirmed?

A: JCB’s official product page does not provide detailed specifications. Confirm the filter dimensions and configuration before installation.

Q: Is this an OEM or aftermarket replacement?

A: This page describes a new aftermarket replacement. Genuine OEM status has not been verified.

Why Sourcing From WinsParts?

WinsParts supports part-number and application checking to help parts distributors and repair workshops reduce ordering errors.

Product Function & Specs:

251-0580 is a Caterpillar console wiring harness used to route electrical power and signals between relevant console-mounted electrical circuits. Cat describes this harness as including terminals for connecting electronic pump control ground. The exact connector arrangement and circuit configuration should be verified against the applicable machine wiring diagram.

Failure Symptoms:

• Intermittent electrical operation or signal interruption
• Visible wire insulation, terminal, or connector damage
• Electrical faults associated with console-mounted circuits

Quick Installation Notes:

• Disconnect the applicable electrical power supply before beginning installation.
• Compare the harness routing, terminals, and connectors with the machine wiring diagram.
• Secure the harness correctly and check for interference, loose connections, or exposed wiring.

Maintenance Tips:

• Inspect wiring insulation and connectors for wear, corrosion, and physical damage.
• Keep harness routing clear of excessive heat, abrasion, and moving components.
• Investigate recurring electrical faults before replacing additional components.

FAQ:

Q: What is part number 251-0580?

A: It is a Caterpillar console wiring harness with terminals used for relevant electrical connections, including electronic pump control ground.

Q: Which Caterpillar machines are associated with this harness?

A: Cat lists applications including 320D, 330D, 345D, 349D, and 336D. Confirm the machine serial number and harness configuration before ordering.

Q: Is this an OEM or aftermarket replacement?

A: This page describes a new aftermarket replacement. Genuine OEM status has not been verified.

Q: Are the connector and terminal specifications confirmed?

A: The exact connector and terminal configuration has not been independently verified. Compare the replacement harness with the original part and applicable wiring diagram.

Q: Can I purchase this harness in bulk?

A: Yes. Contact WinsParts for wholesale enquiries and application verification.

Why Sourcing From WinsParts?

WinsParts supports part-number and application checking to help parts distributors and repair workshops reduce ordering errors.

Product Function & Specs:

343-2873 is a plastic straight bellow seal used in the front suspension frame of selected Caterpillar articulated and ejector trucks. The seal helps protect the associated assembly from external contamination. Caterpillar lists an inside diameter of 5.94 inches, an outside diameter of 9.7 inches, and a width of 2.56 inches.

Failure Symptoms:

• Cracking, splitting, or visible deterioration of the bellow seal
• Contamination entering the protected suspension-frame area
• Loose, damaged, or displaced seal around the mounting area

Quick Installation Notes:

• Inspect the mounting area and remove accumulated dirt before installation.
• Confirm the seal dimensions and mounting configuration against the applicable parts diagram.
• Ensure the bellow seal is correctly positioned and securely seated after installation.

Maintenance Tips:

• Inspect the bellow seal periodically for cracks, cuts, and deformation.
• Keep the surrounding suspension-frame area clean during routine maintenance.
• Replace damaged seals promptly to help limit contamination of protected components.

FAQ:

Q: What is part number 343-2873?

A: It is a Caterpillar plastic straight bellow seal for front suspension frame applications.

Q: Which machines use this bellow seal?

A: Caterpillar lists applications including 735C, 740C, 745C, 740 GC, 735B, and 740B. Confirm the machine configuration before ordering.

Q: What are the listed dimensions?

A: The published dimensions are 5.94 inches inside diameter, 9.7 inches outside diameter, and 2.56 inches width.

Q: Is this an OEM or aftermarket replacement?

A: This page describes a new aftermarket replacement. Genuine OEM status has not been verified.

Q: Can I purchase this seal in bulk?

A: Yes. Contact WinsParts for wholesale enquiries and application verification.

Why Sourcing From WinsParts?

WinsParts supports part-number and application checking to help parts distributors and repair workshops reduce ordering errors.

Product Function & Specs:

The VOE14500233 is identified by Volvo Construction Equipment as a Filter Element. Volvo lists the part for multiple excavator and wheeled excavator applications. Independent filtration references identify VOE14500233 as a hydraulic tank breather air filter element, where it helps limit airborne contamination entering the hydraulic reservoir.

Failure Symptoms:

• Filter element becomes visibly contaminated or restricted.
• Abnormal air-flow or pressure conditions occur at the hydraulic reservoir breather.
• Dust or other contamination is found around the breather or filter housing.

Quick Installation Notes:

• Clean the surrounding area before removing the existing filter element.
• Inspect the breather housing, sealing surfaces, and related components before installation.
• Install the replacement element according to the applicable Volvo service procedure and check the assembly after installation.

Maintenance Tips:

• Inspect the breather element periodically for contamination and restriction.
• Keep the breather housing and surrounding service area clean.
• Replace a damaged or restricted element according to the applicable maintenance procedure.

FAQ:

Q: Can this part replace VOE14500233?

A: It is offered as a new aftermarket replacement for the referenced part number. Confirm the machine configuration before ordering.

Q: Is this an OEM or aftermarket replacement?

A: It is a new aftermarket replacement intended for heavy machinery service. Product configuration and application should be confirmed before ordering.

Q: Which machines are compatible with VOE14500233?

A: Volvo’s official listing includes EC210B, EC240B, EC250E, EC290B, EC300E, EC140C, ECR145C, and ECR235C, among other applications. Confirm the machine serial number before ordering.

Q: What type of filter element is VOE14500233?

A: Volvo officially identifies it as a Filter Element. Independent filtration references identify it as a hydraulic tank breather air filter element. Confirm the installation position against the applicable parts catalog.

Q: Can I purchase in bulk?

A: Yes. WinsParts supports wholesale enquiries for parts dealers, distributors, and repair workshops.

Why Sourcing From WinsParts?

WinsParts helps dealers and workshops confirm part numbers, product configuration, and application details before shipment.

Product Function & Specs:

The 11QA-44100 is identified in Hyundai parts references as HOSE-LOWER(B), or Lower Hose B, within the cooling system. It forms part of the coolant hose assembly and provides a flexible connection between the applicable cooling-system components. Correct hose routing and secure connections are important for coolant circulation and leak prevention.

Failure Symptoms:

• Coolant leakage around the hose or connection points.
• Visible cracking, swelling, abrasion, or hose deterioration.
• Reduced coolant circulation associated with a damaged or restricted hose.

Quick Installation Notes:

• Allow the cooling system to cool and drain coolant as required before removing the existing hose.
• Inspect hose connections, clamps, fittings, and mating surfaces before installation.
• Refill and bleed the cooling system according to the applicable service procedure, then check for leakage.

Maintenance Tips:

• Inspect the hose periodically for cracking, swelling, abrasion, or other visible deterioration.
• Check nearby clamps and connections for looseness or signs of coolant leakage.
• Maintain the cooling system according to the applicable manufacturer’s service schedule.

FAQ:

Q: Can this part replace OEM 11QA-44100?

A: It is offered as an aftermarket replacement for the referenced part number. Confirm the machine serial number before ordering.

Q: Is this an OEM or aftermarket replacement?

A: It is a new aftermarket replacement intended for heavy machinery cooling-system service. Product configuration and application should be confirmed before ordering.

Q: Which machines are compatible with 11QA-44100?

A: Available parts references associate 11QA-44100 with Hyundai R330LC-9SH, R380LC-9SH, and R430LC-9SH. Confirm the exact machine model and serial number before ordering.

Q: What should be checked after installing this cooling-system hose?

A: Refill and bleed the cooling system correctly, inspect the hose connections for leakage, and monitor the system after reaching normal operating temperature.

Q: Can I purchase in bulk?

A: Yes. We support wholesale orders for parts dealers and repair workshops with part-number review and order coordination.

Why Sourcing From WinsParts?

WinsParts helps dealers and workshops confirm part numbers, product configuration, and application details before shipment.

Product Function & Specs:

The 11QA-44090 is identified in Hyundai parts references as a Lower Hose within the cooling system. It forms part of the coolant hose circuit and provides a flexible connection between the applicable cooling-system components. Correct hose routing and secure connections are important for maintaining coolant circulation and preventing leakage.

Failure Symptoms:

• Coolant leakage around the hose or connection points.
• Visible cracking, swelling, abrasion, or deterioration of the hose.
• Reduced coolant circulation associated with a damaged or restricted hose.

Quick Installation Notes:

• Allow the cooling system to cool and drain coolant as required before removing the existing hose.
• Inspect the hose connections, clamps, fittings, and sealing surfaces before installation.
• Refill and bleed the cooling system according to the applicable service procedure, then check for leakage.

Maintenance Tips:

• Inspect the hose regularly for cracking, swelling, abrasion, or other visible deterioration.
• Check nearby clamps and connections for looseness or signs of coolant leakage.
• Maintain the cooling system according to the manufacturer’s recommended service schedule.

FAQ:

Q: Can this part replace OEM 11QA-44090?

A: It is offered as an aftermarket replacement for the referenced part number. Confirm the machine serial number before ordering.

Q: Is this an OEM or aftermarket replacement?

A: It is a new aftermarket replacement intended for heavy machinery cooling-system service. Product configuration and application should be confirmed before ordering.

Q: Which machine is compatible with 11QA-44090?

A: Available parts references associate 11QA-44090 with the Hyundai R380LC-9 and R380LC-9SH. Confirm the exact machine model and serial number before ordering.

Q: What should be checked before installing this lower hose?

A: Check the hose routing, connection points, clamps, and mating surfaces before installation. Confirm that the replacement matches the existing cooling-system configuration.

Q: Can I purchase in bulk?

A: Yes. We support wholesale orders for parts dealers and repair workshops with part-number review and order coordination.

Why Sourcing From WinsParts?

WinsParts helps dealers and workshops confirm part numbers, product configuration, and application details before shipment.

Product Function & Specs:

The 11QA-44051 is identified in Hyundai parts references as an Upper Hose within the cooling system. It connects the applicable coolant passages and allows coolant to circulate between connected components. Correct hose configuration and sealing are required to prevent coolant leakage during operation.

Failure Symptoms:

• Coolant leakage around the hose connection.
• Visible cracking, swelling, or deterioration of the hose.
• Reduced coolant circulation associated with a damaged or restricted hose.

Quick Installation Notes:

• Drain the cooling circuit as required and allow the system to cool before removing the hose.
• Clean the hose connections and inspect clamps, fittings, and sealing surfaces before installation.
• Refill and bleed the cooling system according to the applicable service procedure, then check for leakage.

Maintenance Tips:

• Inspect the hose regularly for cracking, swelling, abrasion, or other visible deterioration.
• Check hose clamps and nearby connections for looseness or coolant leakage.
• Maintain the cooling system according to the manufacturer’s recommended coolant service interval.

FAQ:

Q: Can this part replace OEM 11QA-44051?

A: It is offered as an aftermarket replacement for the referenced part number. Confirm the machine serial number before ordering.

Q: Is this an OEM or aftermarket replacement?

A: It is a new aftermarket replacement intended for heavy machinery cooling-system service. Product configuration and application should be confirmed before ordering.

Q: Which machine is compatible with 11QA-44051?

A: Available parts references associate 11QA-44051 with the Hyundai R380LC-9. Confirm the exact machine model and serial number before ordering.

Q: What should be checked before installing this coolant hose?

A: Check the hose routing, connection points, clamps, and mating surfaces before installation. Confirm that the replacement matches the existing configuration.

Q: Can I purchase in bulk?

A: Yes. We support wholesale orders for parts dealers and workshops. Contact us directly for bulk pricing and shipping options.

Why Sourcing From WinsParts?

Before quotation, we can compare the supplied part number with machine or engine information and flag details that require confirmation.