Product Function & Specs:

LC10V00002S123 is identified as a roller bearing used in selected Kobelco hydraulic pump assemblies. The bearing supports rotating components within the pump and helps maintain alignment during hydraulic system operation.

Parts catalogues associate LC10V00002S123 with hydraulic pump assemblies for selected Kobelco excavators. The part is also listed together with 2437U213S123 as an associated bearing reference. Confirm the hydraulic pump assembly and machine serial number before ordering.

Public sources do not provide sufficiently consistent information to verify the bearing dimensions, material, load rating, or clearance. These specifications should therefore be confirmed from the original component or applicable parts documentation.

Failure Symptoms:

• Abnormal noise or vibration from the hydraulic pump
• Excessive play or wear in the pump rotating assembly
• Unstable hydraulic pump operation associated with bearing wear

Quick Installation Notes:

• Confirm the bearing number, hydraulic pump assembly, and machine serial number before removal.
• Inspect the shaft, bearing seat, pump housing, and related rotating components for wear or damage.
• Use suitable bearing installation tooling and follow the applicable hydraulic pump service procedure.

Maintenance Tips:

• Maintain hydraulic oil cleanliness and follow the applicable hydraulic filter service schedule.
• Monitor the hydraulic pump for abnormal noise, vibration, leakage, or changes in performance.
• Inspect bearing-related components during scheduled hydraulic pump inspection or overhaul.

FAQ:

Q: What is Kobelco LC10V00002S123?

A: LC10V00002S123 is identified as a roller bearing used in selected Kobelco hydraulic pump assemblies.

Q: Is there another part number associated with LC10V00002S123?

A: Public parts listings associate LC10V00002S123 with 2437U213S123. Confirm the part number against the original bearing and hydraulic pump assembly before ordering.

Q: Which Kobelco machines are associated with this bearing?

A: Public parts listings associate the bearing with selected SK200-8 and SK330-8 hydraulic pump applications. Machine serial number and pump configuration should be verified before ordering.

Q: Is this an OEM or aftermarket replacement?

A: This product is supplied as a new aftermarket replacement. It is not represented as a genuine Kobelco factory part.

Q: What should be checked before installation?

A: Confirm the bearing number, hydraulic pump model, shaft and housing condition, machine serial number, and installation requirements before fitting the replacement.

Why Sourcing From WinsParts?

WinsParts supports part-number and hydraulic-pump configuration checks before quotation, helping parts dealers and repair workshops reduce ordering errors. Worldwide export and shipping coordination is available.

Product Function & Specs:

787846-5001S is identified by Garrett as a GT3271LS turbocharger associated with the Hino J08E engine used in selected Kobelco construction equipment applications.

• Turbocharger Model: GT3271LS
• Engine Model: J08E
• Engine Displacement: 7.7L
• Rated Output Listed: 177 HP at 2,100 RPM
• Turbocharger Technology: Wastegated
• Actuation: Pneumatic

Garrett lists OE reference S1760-E0200 for this turbocharger. The original turbocharger nameplate, engine information, and mounting configuration should be checked before ordering.

Failure Symptoms:

• Reduced engine power or slow acceleration under load
• Abnormal turbocharger noise or vibration
• Excessive exhaust smoke or increased oil consumption associated with turbocharger faults

Quick Installation Notes:

• Compare the turbocharger nameplate, part number, housing orientation, and mounting points with the replacement.
• Clean the oil supply and drain lines and inspect the air intake system for contamination.
• Prime the turbocharger lubrication circuit and follow the applicable engine service procedure before operation.

Maintenance Tips:

• Use the specified engine oil and maintain the recommended oil-change intervals.
• Inspect air filters, intake hoses, oil lines, and connections for blockage or leakage.
• Monitor boost performance, unusual noise, smoke, and oil consumption during routine service.

FAQ:

Q: What is 787846-5001S?

A: 787846-5001S is a Garrett GT3271LS turbocharger associated with the Hino J08E 7.7L diesel engine used in selected Kobelco equipment.

Q: Which engine uses this turbocharger?

A: Public Garrett and specialist turbocharger catalogues associate this part with the Hino J08E engine. Confirm the engine identification and original turbocharger nameplate before ordering.

Q: Which Kobelco machines are listed?

A: Listings associate the turbocharger with Kobelco SK350 and SK350-8 excavators. Other applications should be verified individually using the machine serial number.

Q: Is this a genuine Garrett turbocharger?

A: The reference number is a Garrett turbocharger number. This product page describes a new aftermarket replacement and does not claim genuine Garrett factory status.

Q: What should be checked before installation?

A: Check the turbocharger model, OE reference, housing orientation, mounting points, oil connections, and actuator arrangement against the original unit.

Why Sourcing From WinsParts?

WinsParts supports part-number and engine-configuration checks before quotation, helping parts dealers and repair workshops reduce ordering errors. Worldwide export and shipping coordination is available.

Product Function & Specs:

The LS12B01035P1 is identified as a Kobelco bushing used in the arm assembly. It provides a bearing surface between mating components and supports controlled movement at the associated joint. Kobelco parts references list two LS12B01035P1 bushings in the 4.9 m long-arm assembly.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01035P1?

A: LS12B01035P1 is a Kobelco bushing used in the arm assembly of large excavator applications.

Q: Which Kobelco machines use LS12B01035P1?

A: Public parts references associate the part with Kobelco SK480LC-6, SK480LC, and SK485-8. Confirm the machine serial number and arm configuration before ordering.

Q: How many LS12B01035P1 bushings are used in the referenced assembly?

A: The Kobelco long-arm assembly reference specifies two LS12B01035P1 bushings.

Q: What should be checked before installing this bushing?

A: Inspect the mating pin, bushing bore, housing, and adjacent arm components for wear or damage before installation.

Q: Is LS12B01035P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number LS12B01035P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The LS12B01046P1 is identified as a Kobelco bushing bearing sleeve used at pivot and joint locations. It provides a bearing surface between mating components and supports controlled movement within the associated excavator structure. Public parts references associate this part with Kobelco SK480LC-6, SK480LC, and SK485-8 applications.

Failure Symptoms:

• Excessive play at the associated pivot or joint
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the joint area

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the applicable joint assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01046P1?

A: LS12B01046P1 is identified as a Kobelco bushing bearing sleeve used in pivot and joint applications.

Q: Which Kobelco machines use LS12B01046P1?

A: Public parts references associate the part with Kobelco SK480LC-6, SK480LC, and SK485-8. Confirm the machine serial number and assembly configuration before ordering.

Q: What should be checked before installing this bushing?

A: Inspect the mating pin, bushing bore, housing, and adjacent components for wear or damage before installation.

Q: Is LS12B01046P1 an engine part?

A: No engine application has been verified for this part. It is identified as a structural or joint bushing used on Kobelco excavator applications.

Q: Is LS12B01046P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for part number LS12B01046P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm, pivot, and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The 2405T1334 is identified as a Kobelco bushing used in the long-arm assembly. It provides a bearing surface between mating components and supports controlled movement at the arm connection. The referenced Kobelco parts catalogue lists two bushings in the 4.9 m long-arm assembly and specifies 120 mm inside diameter, 145 mm outside diameter, and 130 mm length.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the mating pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco 2405T1334?

A: 2405T1334 is a Kobelco bushing used in the long-arm assembly of large excavator applications.

Q: Which Kobelco machines use 2405T1334?

A: The available Kobelco parts reference associates it with SK480LC-6E, SK480-6S, SK480LC-6, and SK450-6 applications. Confirm the machine serial number and arm configuration before ordering.

Q: What are the published dimensions?

A: The referenced parts catalogue lists 120 mm inside diameter, 145 mm outside diameter, and 130 mm length.

Q: How many 2405T1334 bushings are used in the referenced long-arm assembly?

A: The Kobelco parts reference specifies two 2405T1334 bushings in the 4.9 m long-arm assembly.

Q: Is 2405T1334 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number 2405T1334. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The LS12B01013P1 is identified as a Kobelco bushing used in arm assembly applications. It provides a bearing surface between mating components and supports controlled movement at the arm connection. Kobelco parts references list this part in standard, short, semi-long, and long arm assemblies for the SK480LC.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear at the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01013P1?

A: LS12B01013P1 is a Kobelco bushing used in arm assembly applications on the SK480LC.

Q: Which Kobelco machine uses LS12B01013P1?

A: Public parts references associate the part with the Kobelco SK480LC Dynamic Acera excavator. Confirm the machine serial number and arm configuration before ordering.

Q: Which arm configurations use this bushing?

A: The available parts reference lists LS12B01013P1 in standard 3.45 m, short 2.6 m, semi-long 4.04 m, and long 4.9 m arm assemblies for the SK480LC.

Q: What should be checked before installing the bushing?

A: Inspect the mating pin, bushing bore, and adjacent arm components for wear or damage before installation.

Q: Is LS12B01013P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number LS12B01013P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The LS12B01013P1 is identified as a Kobelco bushing used in arm assembly applications. It provides a bearing surface between mating components and supports controlled movement at the arm connection. Public Kobelco parts references place this part in multiple SK480LC arm configurations.

Failure Symptoms:

• Excessive play at the arm connection
• Uneven wear around the bushing or mating pin
• Abnormal movement or noise from the arm joint

Quick Installation Notes:

• Clean the bushing bore, mating pin, and surrounding surfaces before installation.
• Inspect the pin and housing for wear or damage before fitting the replacement bushing.
• Install the bushing according to the applicable Kobelco service procedure and verify joint movement after assembly.

Maintenance Tips:

• Maintain the specified lubrication condition for the arm assembly.
• Keep the pin and bushing area free from excessive dirt and abrasive contamination.
• Inspect the bushing, pin, and adjacent arm components periodically for wear and excessive play.

FAQ:

Q: What is Kobelco LS12B01013P1?

A: LS12B01013P1 is a Kobelco bushing used in arm assembly applications on the SK480LC.

Q: Which Kobelco machine uses LS12B01013P1?

A: Public parts references associate the part with the Kobelco SK480LC Dynamic Acera excavator. Confirm the machine serial number and arm configuration before ordering.

Q: Which arm configurations use this bushing?

A: The available parts reference lists LS12B01013P1 in standard arm, short arm, semi-long arm, and long arm assemblies for SK480LC.

Q: What should be checked before installing the bushing?

A: Inspect the mating pin, bushing bore, and adjacent arm components for wear or damage before installation.

Q: Is LS12B01013P1 an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement for Kobelco part number LS12B01013P1. Application should be verified before installation.

Why Sourcing From WinsParts?

WinsParts supports part-number and application verification before quotation, helping dealers and repair workshops confirm arm and linkage components against the required Kobelco machine configuration.

Product Function & Specs:

The 2445R372D5 is identified as a dust cap seal used in the Kobelco arm assembly. It helps protect the pin and joint area from external dirt and contamination. The referenced parts catalogue places four units in the long-arm assembly.

Failure Symptoms:

• Visible damage or deterioration of the dust cap seal
• Dirt or debris entering the protected pin-joint area
• Excessive contamination around the arm joint

Quick Installation Notes:

• Clean the seal seat, pin area, and surrounding components before installation.
• Inspect the pin, bushing, and adjacent joint surfaces for wear or damage.
• Install the dust cap seal evenly and check that the joint moves freely after assembly.

Maintenance Tips:

• Inspect arm-joint dust seals during scheduled machine maintenance.
• Keep dirt and abrasive contamination away from exposed pin and bushing areas.
• Inspect related pins and bushings when seal damage or excessive joint contamination is found.

FAQ:

Q: Can this part replace OEM 2445R372D5?

A: It is offered as a new aftermarket replacement for 2445R372D5. Confirm the arm configuration and machine serial number before ordering.

Q: Is this an OEM or aftermarket replacement?

A: The product offered by WinsParts is a new aftermarket replacement. Product configuration and application should be confirmed before installation.

Q: Which Kobelco machines use 2445R372D5?

A: The referenced long-arm assembly catalogue lists it for Kobelco SK480LC-6E, SK480-6S, SK480LC-6, and SK450-6 applications.

Q: What should be checked before installing this seal?

A: Inspect the pin, bushing, seal seat, and adjacent joint surfaces. Keep the sealing area clean and follow the applicable service procedure.

Q: Can I purchase 2445R372D5 in bulk?

A: Yes. We support wholesale orders for parts dealers and workshops. Confirm the required quantity and application when requesting a quotation.

Why Sourcing From WinsParts?

We support part-number checking before quotation and can review machine model and serial-number details to reduce ordering errors.